VAUTID V 145

Hersteller
Ceweld product
Type
Fluxcored wire for hardfacing, weldable without protective gas.
classification
EN ISO
14700: T Fe16
DIN
8555: MF 10-GF-65-GZ
Anwendungen
Rebuilding wornout parts or protecting new machine parts to increase life that suffer from grinding wear combined with increased temperatures.
Type
Fluxcored wire for hardfacing, weldable without protective gas.
Anwendungen
Rebuilding wornout parts or protecting new machine parts to increase life that suffer from grinding wear combined with increased temperatures.
Eigenschaften

High C-, Cr-, Mo-, Nb-, V-, W-alloyed flux-cored wire electrode which forms extremely hard carbides for extremely hard deposits on parts subject to excessively heavy abrasive wear weldable without protective gas. Extreme good wear resistance even at higher temperatures up to 650ºC. More than 1 or 2 layers should not be deposited. Hardness reduction at 400°C app. 4%, at 650°C app. 10%. A Buffer layer with OA 4370 or OA MnCr is recommended in case of old layers or critical base metals. Equivalent in SMAW: Dur 64

Classification
EN ISO
14700: T Fe16
DIN
8555: MF 10-GF-65-GZ
Geeignet für

For fire gratings, sintering plants, augers and blast furnace bells ,gravel washing equipment, sugar mill hammer and knives, clinker crushers, coal mill rollers, screw conveyors, sintering lines, mixer blades etc.

Schweißpositionen
PA
PB
PC
Rücktrocknung
140°C / 24 hr
Analyse
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
5 1.4 0.4 21 6 6.2 0.9 2.1 1.8
Mechanische Gütewerte
Heat
Treatment
RP0,2
(MPa)
Rm
(MPa)
A5
(%)
Hardness
As Welded 64 HRc