CEWELD NiCrMo 622
Ist ein Äquivalent für

SELECTARC NI22

Hersteller

Ceweld product

Type

Solid nickel base filler metal for GMAW welding of high corrosion resistant alloys.

classification

AWS

A 5.14: ERNiCrMo-10

EN ISO

18274: S Ni 6022(NiCr21Mo13Fe4W3)

W.Nr.

2.4635

Anwendungen

CEWELD® NiCrMo 622 is used for welding of nickel-chromium-molybdenum alloys as well as for overlay cladding on carbon, low alloy, or stainless steels. They are also used for dissimilar joints between nickel-chromium-molybdenum alloys and stainless, carbon, or low alloyed steels. Also recommended for joining Molybdenum-containing stainless steels, low alloyed steels and dissimilar welding between earlier mentioned type of steels.,

Type

Solid nickel base filler metal for GMAW welding of high corrosion resistant alloys.

Anwendungen

CEWELD® NiCrMo 622 is used for welding of nickel-chromium-molybdenum alloys as well as for overlay cladding on carbon, low alloy, or stainless steels. They are also used for dissimilar joints between nickel-chromium-molybdenum alloys and stainless, carbon, or low alloyed steels. Also recommended for joining Molybdenum-containing stainless steels, low alloyed steels and dissimilar welding between earlier mentioned type of steels.,

Eigenschaften

CEWELD® NiCrMo 622 offers excellent corrosion resistance in oxidizing as well as reducing media in a wide variety of chemical process environments. It offers an outstanding resistance to stress corrosion cracking, pitting and crevice corrosion.

Classification

AWS

A 5.14: ERNiCrMo-10

EN ISO

18274: S Ni 6022(NiCr21Mo13Fe4W3)

F-nr

43

FM

6

W.Nr.

2.4635

Geeignet für

Nickel-based alloys such as alloy 22 or similar materials, dissimilar welding of nickel-based alloys to each other

M no: 2.4602, 2.4605, 2.4610, 2.4819, 2.4856, 1.4565

NiCr23Mo16Al, NiCr21Mo14W, NiMo16Cr15W, NiMo16Cr16Ti, NiCr22Mo9Nb, X2CrNiMnMoNbN25-18-5-4, X1NiCrMoCuN25-20-7,

Alloy 59, Alloy C22, Alloy C-276, Alloy C-4, Alloy 625, Alloy 24, Alloy 904hMo

UNS: N06059, N06022, N10276, N06455, N0625, S34565

F574, B619, B622 and B626

W86022, N06022

Schweißpositionen

Rücktrocknung

Not required

Gas acc. EN ISO 14175

I1

Analyse

C	Si	Mn	Cr	Ni	Mo	Nb	Ti	V	Fe	W	Co	Cu	Al	P	S	Nb+Ta
0.008	0.08	0.3	22	55	13.5				4	3	1.5

Mechanische Gütewerte

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Impact Energy (J) ISO-V	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	-196°C	Hardness
As Welded	500	740	44	130	220 HV

Product sheet

product sheet

declaration of performance

declaration of conformity

MSDS

product sheet

Ask quotation

MSDS

Certilas

Certilas

Haftungsausschluss

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.