SELECTARC CUS13

Hersteller
Ceweld product
Type
Tin bronze alloy with high percentage of tin for virtually all welding procedures
classification
EN ISO
24373: Cu 5410 / CuSn12P
W.Nr.
2.1056
Anwendungen
Boilers and tubes out of copper or copper alloys, oven soldering etc.
Type
Tin bronze alloy with high percentage of tin for virtually all welding procedures
Anwendungen
Boilers and tubes out of copper or copper alloys, oven soldering etc.
Eigenschaften

Very good deoxidization and high hardness similar to cast bronzes. Surfacing and joining of Copper and CuSn-Alloys. Widely used and recommended for oven soldering. High quality alloyed copper wire Sound, pore free deposits and good electrical conductivity. Good corrosion resistance against seawater. Excellent sliding properties (bearings etc.)

Classification
EN ISO
24373: Cu 5410 / CuSn12P
W.Nr.
2.1056
Geeignet für

Tin bronze alloy with high percentage of tin for virtually all welding procedures. Very good deoxidisation and high hardness similar to cast bronzes. Surfacing and joining of Copper and CuSn-alloys. Widely used and recommended for oven soldering.

Mat.n: 2.1016, 2.1020, 2.1030, 2.1050, 2.1052, 2.1056, 2.1080, 2.1086, 2.1090

CuSn8, CuSn7, CuSn6, CuSn4, G-CuSn7ZnPb, G-CuSn10

Schweißpositionen
PA
PB
PC
PD
PE
PF
PG
Rücktrocknung
Not required
Gas acc. EN ISO 14175
I1, I3
Analyse
C Si Mn P S Ti Fe Cu Zn Pb Sn Al As Ni+Co
0.2 Rem. 0.02 0.01 12
Mechanische Gütewerte
Heat
Treatment
RP0,2
(MPa)
Rm
(MPa)
A5
(%)
Hardness
As Welded 350 120 HB