OK 92.58

Hersteller

Stabelektrode

Ceweld product
Type
Flux cored welding wire developed for welding cast iron with excellent weldability.
classification
AWS
A 5.15: E NiFe-CI
EN ISO
1071: T C NiFe-1
W.Nr.
1.3912
Anwendungen
Joining and rebuilding Cast Iron with globular graphite, tempered Cast Iron and for joining Cast Iron with steel. Used for standards of length, measuring devices, laser components, bi-metal thermostat strip, thermostat rods, and tanks and piping for storing and transporting liquefied gases.
Type
Flux cored welding wire developed for welding cast iron with excellent weldability.
Anwendungen
Joining and rebuilding Cast Iron with globular graphite, tempered Cast Iron and for joining Cast Iron with steel. Used for standards of length, measuring devices, laser components, bi-metal thermostat strip, thermostat rods, and tanks and piping for storing and transporting liquefied gases.
Eigenschaften

Very good welding and wetting characteristics and high resistance to cracks and fissures. Extreme good deposition rate compare to MMA. High strength and good bonding weld metal. NiFe36 has a composition that matches "NiLo'" and offer the lowest schrinkage possible to avoid cracks during heating and the cooling period. The weld deposit also retains good strength and toughness at cryogenic temperatures and has a low coefficient of expansion from cryogenic temperatures to about 500°F (260°C).

Classification
AWS
A 5.15: E NiFe-CI
EN ISO
1071: T C NiFe-1
W.Nr.
1.3912
Geeignet für

Spheroidal Cast Iron, Diluted Cast Iron, old Cast Iron, Steel to Cast Iron etc.

 EN 1561: EN-GJL-100, EN-GJL-150, EN-GJL-200, EN-GJL-250, EN-GJL-300, EN-GJL-350, GG10, GG15; GG20, GG25; GG30; GG35; GG40

EN 1562: EN-GJMB-350, EN-GJMB-550 , EN- GJMW-350, EN- GJMW-550 , GTS 35, GTS 55, GTW 35, GTW 55

EN1563: EN-GJS-400-15, EN-GJS-400-18, EN-GJS-450-10, EN-GJS-500-7, EN-GJS-600-3, EN-GJS-700-2. GGG40, GGG45, GGG50, GGG60; GGG70, GGG80

Schweißpositionen
PA
PB
PC
Rücktrocknung
Not required
Gas acc. EN ISO 14175
I1, M13
Analyse
C Si Mn P S Ni Mo Fe Cu Al Mg Nb+V Ce
0.1 0.5 2.4 36 Rem.
Mechanische Gütewerte
Heat
Treatment
RP0,2
(MPa)
Rm
(MPa)
A5
(%)
Hardness
As Welded 150 HV