ESAB OK autrod 5356

Hersteller
Ceweld product
Type
Mig filler metal for welding Aluminium Magnesium alloys.
classification
AWS
A 5.10: ER5356
EN ISO
18273: S Al 5356 (AlMg5Cr(A))
W.Nr.
3.3556
Anwendungen
Filler metal for welding Aluminium alloys with maximum 5% Magnesium. This Magnesium alloyed Aluminium wire, thanks to its excellent corrosion resistance and its high mechanical properties is mainly used in ship yards, car and railway industry. Thicker sections should be preheated (150°C) prior to welding.
Type
Mig filler metal for welding Aluminium Magnesium alloys.
Anwendungen
Filler metal for welding Aluminium alloys with maximum 5% Magnesium. This Magnesium alloyed Aluminium wire, thanks to its excellent corrosion resistance and its high mechanical properties is mainly used in ship yards, car and railway industry. Thicker sections should be preheated (150°C) prior to welding.
Eigenschaften

Excellent weldabillity and good mechanical strength combined with good corrosion resistance are typical for this alloy. The weld deposit is free from porosity due to the special shaving process and cleaning method during production. AlMg5 is one of the most popular types within the range of aluminum alloys and covers a weight range of alloys. 

Classification
AWS
A 5.10: ER5356
EN ISO
18273: S Al 5356 (AlMg5Cr(A))
F-nr
22
W.Nr.
3.3556
Geeignet für

Aluminium alloys: 

AlMg3, AlMg4, AlMg5, AlMgSi1, AlMgSi0,5,AlMgMn, AlZnMg1, G-AlMg3Si, G-AlMg5Si, G-AlMg10, AlMg1SiCu, AlMgSi0,7, AlZn4,5Mg1, AlZnMg4,5Mn ,AlZn5,5Mg1, AlSi1MgMn, AlSiMg(A), AlMg 1

3.3315, 3.3545, 3.3206, 3.3210, 3.2315, 3.3211, 3.4335, 3.3535, 3.3555, 

EN AW 5086, EN AW 6060, EN AW 6005A, EN AW , EN AW 6061, EN AW 7020, EN AC 51400, EN AC 51300, EN AC 51100, EN AW 5454

Zulassungen
CE
Schweißpositionen
PA
PB
PC
PD
PE
PF
PG
Rücktrocknung
Not required
Gas acc. EN ISO 14175
I1, I3
Analyse
Si Mn Cr Ti V Fe Cu Zn Al Mg Zr Be Ga+V Si+Fe
0.2 0.1 0.1 0.1 Rem. 5
Mechanische Gütewerte
Heat
Treatment
RP0,2
(MPa)
Rm
(MPa)
A5
(%)
Hardness
As Welded 130 280 25 HRc