CEWELD {{ title }}
Ist ein Äquivalent für

CastoDur N 6070

Hersteller

Castolin Eutectic

Ceweld product

Type

Basic coated electrode with a sintered tungsten carbide core wire.

Anwendungen

For extreme wear resistance, elements as Niobium and Chromium carbides are also added to obtain a complex carbide structure. Specially used for applications subject to abrasive wear such as sand or other minerals with little impact. Recommended for the brick and clay industry or extreme high temperature applications in power plant industries.

Type

Basic coated electrode with a sintered tungsten carbide core wire.

Anwendungen

For extreme wear resistance, elements as Niobium and Chromium carbides are also added to obtain a complex carbide structure. Specially used for applications subject to abrasive wear such as sand or other minerals with little impact. Recommended for the brick and clay industry or extreme high temperature applications in power plant industries.

Eigenschaften

CEWELD E DUR 71 is designed to offer full wear resistance and high hardness already achieved in the first layer. To be welded with low as possible current to avoid burnout of elements.

Geeignet für

For extreme heavy abrasion and wear applications such as, mixers and screws in the brick and clay industry, electricity powerplant srews (ash), mining, drilling etc

Schweißpositionen

Rücktrocknung

Not required

Note title

Hardness HRc

first layer: ± 63-65 HRc
second layer: ± 66-70 HRc

Mechanische Gütewerte

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				65 HRc

product sheet

declaration of performance

declaration of conformity

Ask quotation

product sheet

Ask quotation

Haftungsausschluss

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.