… FL 8111 is a fluoride basic agglomerated flux for stainless steel SAW welding. Basicity: about 2,6 (according to Boniszewski) Current: DC or AC, in single or multi-wires. Grain size: 2-28 … Submerged arc welding with stainless steel wires, AISI 410, 410NiMo, 308L, 316L, 2209 …

… structural steels with yield strength of Rp0,2 550 MPa (80 ksi). As welding flux we recommend our type FL 155, classification S A FB 1 55 …

… weldability. Due to the risk of grain growth in the melted zone, welding wire with a diameter larger then 1,2 mm is to be avoided … …

… tungsten tool tips. Very good weld deposit appearance and outstanding welding properties on both AC and DC+. Preheating is not required. … …

… on wire diameter) tungsten carbides. OA WC2-Fe  has good welding characteristics. Multi-layer deposits are not recommended due …

… for use of short arc and spray arc. Excellent gap bridging for root welding. High-efficiency type for economic production of creep …

… For welding heat-resistant austenitic steels of the 25% Cr, 20% Ni …

… requirements at sub zero temperatures down to -60 °C. Excellent welding properties. Yield strength > 550 MPa. Low hydrogen content HD < …

… show a higher resistance against oxidation and corrosion in aqueous solutions and can be operated up to maximum 650°C (1202°F). Primary WC …

… Heavy parts and thicker plates should be preheated (150°C), prior to welding. At the same time, it keeps the benefits of being relatively …