… Mo content. During build-up welding, the weld metal already achieves approximately the composition of ASTM 316 in the 1st layer. … ISO …

… Good arc restriking even with cold wire tip, suitable for robot applications. Ideal for use of short arc and spray arc. Excellent gap …

… The weld deposit is scale-resistant up to approx. 800°C in normal atmosphere and oxidizing gases. The weld …

… up to maximum 650°C (1202°F). Primary WC carbide size: 2.5 μm FSSS Apparent density (ISO 3923-2) 5.2-5.8 g/cm³ Particle shape: …

… subjected to grinding and medium impact levels. Very good weld deposit appearance and outstanding welding properties on both AC and DC+. …

… reduced when using AlSi12 as a filler alloy. The alloy may be used in applications at sustained elevated temperatures. Non-heat treatable. …

… quality with controlled cast and helix for semi and or semi–automatic applications. Weldable with Co2 and Mix gas.  … St 33 – St 52 ,A, E, …

… Our type is approved for use down to -60 degrees. … 43 … P 110 MR …

… be used with FL188 (or an other type depending on the requirements and application). … CuNi, Reh ≤ 460MPa ISo 15608: 1.4 1.8963, 1.8946, …

… which make it ideally suited for a wide variety of component applications in the aerospace and power industries. It is used for …