… deposits are air hardenable that can normally be heat-treated after welding … Ferritic 13 % Chrome steel, 1.4000, 1.4001, 1.4002, 1.4003, …

… FL 838 is an agglomerated flux for SAW welding stainless steels and Nickel based alloys: AISI 308L, 347, 316L, …

… Special alloy for welding aluminium-magnesium basis alloys with maximum 5% Mg. Zirconium …

… treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, G-AlSi11 G-AlSi12 (Cu), G-AlSi7Mg, G-AlSi6Cu4 , …

… present in alloy C22; it is therefore considered suitable for welding this group of alloys. Alloy 59 consumables also provide strong, …

… Attractive bead appearance without slag residues. Best to be used with welding flux FL 915 … 1.4317, 1.4313, 1.4407, 1.4414,    GX4CrNi13-4, …

… is good machinable. Very good weld deposit appearance and outstanding welding properties on both AC and DC+. Preheating is not required. …

… at sub zero temperatures down to - 60 °C (-80°C). Excellent welding properties. Therefore, suitable for the economic processing of … content HD< 3 ml/100g even after long storage. … Reh ≤ 500 MPa, ISO 15608: 1.3, 2.1, 2.3 S355JR, S355J0, S355J2, S450J0, S355N-S460N, …

… Excellent welding properties. High world wide excepted quality with controlled … service at temperatures up to 500°C.  … Typ 0,5Mo  ≤ 460 MPa,  ISO 15608: 1.2, 1.3 1.5415, 1.0481, 1.0482 15 Mo3, 16Mo3 , 20MnMoNi4-5, …

… strength alloy with very good mechanical properties and perfect welding characteristics. High impact strength at very low temperatures … of the weld deposit. Weldable with Co2 and Mix gas. … Reh ≤ 960 MPa ISO 15608: ~3.1, 3.2 (Reh > 690 MPa) 1.8796, 1. 8925, 1.8940, 1.8983, …