… Excellent welding properties with high buildup capacity and low dilution rate …

… Coppered solid wire for SAW welding in combination with our FL 180 flux … Unalloyed steels: St 33 – …

… analysis. Best to be used with CEWELD® FL 915 or CEWELD® FL 8111 welding flux.The deposit is resistant to seawater, thin acids and scale …

… present in alloy C22; it is therefore considered suitable for welding this group of alloys. Alloy 59 consumables also provide strong, …

… impact levels. Very good weld deposit appearance and  outstanding welding properties on both AC and DC+ with a recovery of 200% for …

… crack resistant alloy with high mechanical properties and excellent welding characteristics. High impact strength at sub zero temperatures … down to -60 °C. Weldable with Co2 and Mixed gas. … Reh < 690 MPa Iso 15608: 2.2 u 3.2 ( 460 < Reh ≤ 690(700) MPa ) 1.8914, 1.8927, …

… at sub zero temperatures down to - 60 °C (-80°C). Excellent welding properties. Therefore, suitable for the economic processing of … content HD< 3 ml/100g even after long storage. … Reh ≤ 500 MPa, ISO 15608: 1.3, 2.1, 2.3 S355JR, S355J0, S355J2, S450J0, S355N-S460N, …

… Special alloy for welding aluminium-magnesium basis alloys with maximum 5% Mg. Zirconium …

… against hot cracking due to the high Mo content. During build-up welding, the weld metal already achieves approximately the composition of ASTM 316 in the 1st layer. … ISO 15608: 8.1  Austenitic ≤ 19 % Cr , TÜV 1000: Gr. 21-30,  1.4583, …

… strength alloy with very good mechanical properties and perfect welding characteristics. High impact strength at very low temperatures … of the weld deposit. Weldable with Co2 and Mix gas. … Reh ≤ 960 MPa ISO 15608: ~3.1, 3.2 (Reh > 690 MPa) 1.8796, 1. 8925, 1.8940, 1.8983, …