1. … Extreme high tensile strength alloy with very good mechanical properties and perfect welding characteristics. High impact strength at very low temperatures with exceptional plasticity of the …
  2. … Very good corrosion resistance and high hardness due to the amount of „cobalt“ even at higher temperatures. High hardness achieved in the first layer and often used as economical …
  3. … Very good corrosion resistance combined with excelent hardness properties at temperatures upto 650°C. Scale resistant till 900°C and excellent strength at high working temperatures. Excellent weldability and often …
  4. … deposit can be machined  with tungsten tool tips and by grinding. The hardness of the deposit will degrease 16% at 300°C and about 30% at … over a wide temperature range, and retains a reasonable level of hardness up to 500°C (930°F). … Examples include valve seats and gates; …
  5. … metal to metal wear resistance combined with impact, despite the high hardness several layers can be applied without risk of chipping of. The weld deposit is temperature resistant up to 500°C and hardness will remain very well at increased temperatures. Scale …
  6. … CEWELD NiCro 92 provides high mechanical strength and corrosion resistance at temperatures ranging from the … region to over 980ºC. The weld deposit can be age hardened for greater strength at temperatures to about 700ºC. … Joining Inconel and Incoloy …
  7. … recommended for welding fine grained similar alloyed high yield strength steel (< 830 Mpa) in case high impact values are required at sub zero temperatures. Hydrogen content HD < 4 …
  8. … Weld metal deposited by SA Nicro 625 has high strength and extreme corrosion resistance, including oxidation resistance and creep-rupture strength at elevated temperatures. Flux FL 860 ESHC … SA Nicro 625 is …
  9. … weld metal and has properties similar to “Monel 400”. It has good strength and resists corrosion in many media, including sea water, … is not age hardenable and when used to join Monel K-500 it has lower strength then the base metal. … 2.4360, 2.4375, NiCu30Fe, NiCu30Al, …
  10. … power hammering, burnishing, or hard particle impingement. This hardness creates a tough, ductile, wear-, corrosion-, and high-temperature resistant surface. The hardness of 30% cold-worked wrought product is approximately RC50. …