… High pressure resistance and high wear resistance. The alloy is characterized by very low thermal electromotive force (emf) compared to …

… The weld metal of the CEWELD 35-45Nb can be used in a low-sulphur, carbon-enriching atmosphere up to 1175°C … resistance and good resistance to carburization and oxidation. No preheating or post heat treatment is necessary. Pay attention to low …

… Mechanical properties listed below reflect utilization of a post-weld … between 1020°C (1875°F) and 1050°C (1925°F) for one hour, followed by precipitation hardening between 612°C (1135°F)  UTS ~ 1130 MPa and YS ~ 900 MPa … Suitable for precipitation hardening stainless steel used for welding materials of …

… The presence of tin improves the fluidity and is useful to increase the activity of the flux. Do not use this alloy above working temperatures …

… Very good abrasion resistance in combination with impact even at higher temperatures up to 550ºC. To much layers should be avoided, preheat is necessary to avoid cracking. A buffer layer with AA M690 or … table rolls, mineral and brick industry, stone crushers. … ~1.2606 … AA M650 … A 5.21: ERFe-8 … 14700: T Fe8 …

… Atteindre une limite d'élasticité de 890 N/mm2 est déjà extrêmement difficile et les restrictions T-8/5 sont presque impossibles à respecter dans la pratique. Habituellement, des … et la plupart du temps, la conception est sous-adaptée. Ceweld AA M960 a été développé pour atteindre une limite d'élasticité d'au moins …

… CEWELD E NiFe 60/40 K has a few benefits compare to other “FeNi” types … current, copper coated core wire and a powerful arc at very low amps. Preheating is normally done to slow down the cooling speed, in case you … EN-GJS-400-15, EN-GJS-400-18, EN-GJS-450-10, EN-GJS-500-7, EN-GJS-600-3, EN-GJS-700-2. GGG40, GGG45, GGG50, GGG60; GGG70, GGG80 … E NiFe …

… CEWELD® AlSi12 Tig was originally developed as a brazing alloy to take … point and narrow freezing range. In addition, it has a higher silicon content than AlSi5, which provides increased fluidity and reduced … elevated temperatures. Non-heat treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, G-AlSi11 G-AlSi12 …

… De nombreuses années d'essais de nouvelles compositions de rechargement ont permis d'obtenir un nouveau fil de soudure spécial pour Nihard, d'une durée de vie exceptionnelle Après 1547 heures …

… NiCrMo 686 (UNS N06686/W.Nr. 2.4606) is a single-phase, austenitic … to enhance properties. Low carbon (C) helps minimize grain boundary precipitation to maintain corrosion-resistance in the heat-affected … and super-austenitic stainless steels, nickel alloys such as UNS N06059 and N06022, INCONEL alloy C-276, and INCONEL alloys 622, C22, 625, …