1. … in case of old layers or critical base metals.. Equivalent in SMAW: CEWELD® Dur 62S  … Trash crushing, impact resistant   … OA 50 … …
  2. … elevated temperatures. Non-heat treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, G-AlSi11 G-AlSi12 …
  3. … of up to 550°C. Typical applications are in power plant construction, pressure pipe, turbine and boiler construction. The alloy is also used …
  4. … and down hand welding. Excellent against pitting and stress corrosion.PREN above 35 weldmetal offers outstanding resistance against pitting. …
  5. … appearance and outstanding welding properties on both AC and DC+. Preheating is not required. … Mixing arms, Cold cutting tools, Hammers, …
  6. … Alloy 740H Tig is a nickel-base, precipitation hardenable superalloy that offers a unique combination of …
  7. … resistance and good resistance to carburization and oxidation. No preheating or post heat treatment is necessary. Pay attention to low …
  8. … at higher temperatures up to 550ºC. To much layers should be avoided, preheat is necessary to avoid cracking. A buffer layer with AA M690 or …
  9. … down hand welding. Excellent against pitting and stress corrosion. The PRE typical value of 36.1 stimulates outstanding impact properties at …
  10. … 10 KJ/cm. Cooling time (T8/5) must be adjusted by travel speed and preheat temperature. … S890 TM-pipe steels to StE 890 to S890QL1, A …