… properties and no limmits in the number of layers. The deposit is non magnetic and can not be flame cut.  … Rebuilding, buffer layers, rails, rails crossings, dredger teeth, blast furnace mantles … OA MnCr … 14700: T Fe9 …

… the requested mechanical properties the heat input should be kept around 10 KJ/cm. Cooling time (T8/5) must be adjusted by travel speed and …

… recommended for oven soldering. High quality alloyed copper wire. Sound, pore free deposits and good electrical conductivity. Excellent …

… mechanical properties within a wide range of heat inputs. Usable under AWS D1.8 for use on Demand Critical welds. … Rebuilding and …

… compared to solid wires. Excellent weld metal quality and X-ray soundness … 1.4507, 1.4410, 1.4468, 1.4515, 1.4517, 1.4501, 1.4467, …

… arc with deep penetration characteristics in order to ensure sound joint welds with good X-ray quality.. … Reh ≤ 420 MPa ISO 15608: …

… is therefore sensitive to hot cracking. The temperature limits for use under intermittent oxidation depend on cycle frequency. In general the …

… compared to solid wires. Excellent weld metal quality and X-ray soundness. … ISO 15608: 8.1  Austenit ≤ 19 % Cr , TÜV 1000: Gr. 21-30,  …

… as the base metal. Age hardened condition: 720ºC for 8 Hours, furnace Cool 55ºC/hour to 620ºC than Air Cool for 8 hours … Inconel …

… and suitable for applications when exposed to hydrogen sulfide or sulfur dioxide. … The nominal composition (wt.-%) of filler metal of this …