… process. Due to the low dilution with the base metal a hardness exceeding 50 HRc can be achieved already in the first layer. Multiple layers … / or submerged arc strip for hardfacing against schock and wear, Rebuilding wornout parts such as screws, chrusher hammers, drive tumblers, chrusher rolls, dredging parts etc.. For ESW welding FL 830 ESHC should be used as welding flux to obtain the results …

… metal has low levels of tramp elements (eg. Sn, As, Sb and P) providing a low Bruscato Factor(X < 10 ppm)for temper embrittlement …

… SA 904L is used for welding materials of similar chemical composition which are used for …

… parts and thicker plates should be preheated (150°C), prior to welding. At the same time, it keeps the benefits of being relatively …

… above 816°C (1500°) up to 1149°F (2100°F), especially when welding on base metals of nickel-iron-chromium alloys. … Inconel alloys …

… to 900 °C. Extreme high elongation and impact values for critical welding applications. … Screening steels Tools steels, Low alloyed … 51S7*; 56SC7*, 45C4*, manganese steels, C45, dissimilar joint welding between steel and stainless steel such as: Armor plate, high carbon steels. Recommended for welding rails, crossing, crusher teeth, hammers and applications where …

… Low spatter loss, easy slag removal. Well suited for joining and rebuilding with extreme low Carbon, Silicon and Manganese content in the weld …

… Extreme easy to weld with excellent welding properties and increased yield strenght. … Reh ≤ 460 MPa (67 ksi) …

… S2 wire can be used with FL 180, FL188, FL 155 and FL 851 depending on the requirements and application. Approvals in combination with FL 188 … A, B, D, E, St 37 - St 52-3, DIN 17 100, H I, H II, 17Mn4, 16Mo5, DIN 17 155, StE 255 - StE 355, DIN 17 102, GS-38, GS-60, DIN 1681, St …

… welds with deep penetration without porosity. Filled welds exceeding an A-height of 4,0 mm are easy to achieve in one single layer for …