1. … feather. The deposit is not mashinable or forgeable. Only grinding with diamond tools is possible.Dur R (Ni) is available as a 500 mm … cast iron or Mn-steel. The main applications are hardfacing and rebuilding of stabilisers and other oilfield tools where maximum protection …
  2. … of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium alloys: AlMg3, AlMg4, AlMg5,AlMgSi0.5, AlMgSi1; …
  3. … heat resistance as well. The spray deposit is only machinable by grinding.  … High-alloyed tubular wire for metal spray on a C-Cr-B- carbide …
  4. … strength alloy with very good mechanical properties and perfect welding characteristics. High impact strength at very low temperatures …
  5. … 400”. It has good strength and resists corrosion in many media, including sea water, salts and reducing acids. The weld metal is not age … NiCu30Fe, NiCu30Al, Monel 400, R405, alloy K500 and dissimilar welding between these alloys. … NiCu30Mn … A 5.14: ERNiCu-7 … 18274: S Ni …
  6. … Tig has low levels of tramp elements (e.g. Sn, As, Sb and P) providing a low Bruscato Factor(X < 10 ppm)for temper embrittlement …
  7. … strength alloy with very good mechanical properties and perfect welding characteristics. High impact strength at very low temperatures …
  8. … A high basic electrode for welding austenitic-ferritic stainless alloys of the 22% Cr, 5% Ni, 3% Mo …
  9. … a long life for several wear applications. Best to be used with shielding gas M13 (Argon with 1% Oxygen) approx. 15 litres per minute. … Rebuilding of stabilisers and other oilfield tools where maximum protection …
  10. … S2 wire can be used with FL 180, FL188, FL 155 and FL 851 depending on the requirements and application. … A, B, D, E, St 37 - St 52-3, DIN 17 100, H I, H II, 17Mn4, 16Mo5, DIN 17 155, StE 255 - StE 355, DIN 17 102, GS-38, GS-60, DIN 1681, St …