- … not be deposited. A Buffer layer with OA 4370 or OA MnCr is recommended in case of old layers or critical base metals.. … 64-68 HRc …
- … carbide tip tools, hardening is possible. The maximum hardness is dependent on the base metal and is usually already achieved in the first …
- … A Buffer layer with CEWELD® OA 4370 or CEWELD® OA MnCr is recommended in case of old layers or critical base metals.. Equivalent in …
- … Stainless deposit with low carbon content. Low heat input is recommended to avoid pronounced grain coarsening. Absence of stabilization …
- … Coatings of SP 1.4370 exhibit low shrink and are recommend for internal diameters, particularly where thick coatings are … spray wire with good corrosion resistance and low shrink factor, recommended for inside diameters. … SP 1.4370 … 14919: 5.12 …
- … welding must be done in a low heat input procedure and is not recommended for multi-pass applications … 1.4512, X2CrTi12, AISI 409, …
- … or chipping of. In case of sensitive base material preheating is recommended at 300 - 400 °C. Old Hardfacing layers should be removed, clean …
- … to avoid cracking. A buffer layer with OA 4370 or OA MnCr is recommended in case of sensible basematerial or old layers. Weldable without …
- … Recommended for operating temperatures up to 1050°C in carburized …
- … long term creep properties. These consumables are specifically intended for high integrity structural service at elevated temperature so …