… High deposition rate and excellent weldability on DC +. Stainless steel alloy for joining and cladding 17% Chromium alloys and cladding … … 1.4122 (G)X35CrMo17, 1.4313, 1.4000, 1.4001, 1.4002, Cast steels   … 4115 HLS … A 5.4: ~E 430HMo-26 … 3581-A: ~E Z 17 1 B 42 …

… FL 838 is an agglomerated flux for SAW welding stainless steels and Nickel based alloys: AISI 308L, 347, 316L, 309L and 309LN. … FL 838 can be used for a weight range of wire types such as: stainless steel, and nickel based wires ranging from :308L, 316L, 347, 317L, Duplex 2209, Super Duplex 2507 and 2594, 1.4410,  9% Nickel steels and practically all other simmilar grades. … FL 838 … 14174: SA …

… very fine particles that results in excellent wear resistance against heavy abrasion. Usualy the maximum number of layers is 2 till 3 but …

… It has cavitation-erosion resistance ten times that of 304 stainless steel, DUR12 can be used to protect bearing surfaces in non-lubricating …

… FL 155. Developed for welding cold tough, high tensile fine grain steel exceeding a yield strength of 890N/mm2. To obtain the requested … be adjusted by travel speed and preheat temperature. … S890 TM-pipe steels to StE 890 to S890QL1, A 517, X 120 high-strength fine grain structural steels (low temp) to StE 960 (StE 1100 to 12 mm) to S960QL1 (S1100 to …

… requirements for sub zero temperatures down to -60°C.  Suitable for steel types up to 550 MPa yield strength, excellent welding properties …

… CEWELD® 316H is designed for welding 316/316H austenitic stainless steels operating at high temperatures (500-800°C) under long term creep …

… Extremely crack resistant. Suitable for economic welding of CrMoV-steels up to 550 °C. Due to the seamless production process the …

… carbon weld metal of about 23%Cr-13%Ni-2.3%Mo. Cladding on low alloyed steels,the weld metal already achieves approximately the composition of …

… spatter loss, easy slag removal. Suitable for economic welding of Mo-steels up to 500°C (932°F). … Typ 0,5Mo  ≤ 460 MPa,  ISO 15608: 1.2, …