… For welding heat-resistant austenitic steels of the 25% Cr, 20% Ni … relatively severe thermic shock, and is superior to type 309L. … ISO 15608: 8.1  Austenitic ≤ 19 % Cr , TÜV 1000: Gr. 21-30,  Type: 25% …

… offer low hydrogen content and excellent weldability in multi layer welding and narrow gab. … S550QL1, fine grain steels, X70, X80, AISI …

… Excellent weldabillity in combination with FL 860 ESHC with high welding speed and deposition rate. The weld seam shows a fine rippled …

… excellent ductility due to Mn content Excellent corrosion resistance. Welding instructions: Start the electrode with about 130% hot start and … Al99,9Mg1, Al99,9Mg2, AlMgMn,  AlMg1Mg0,5, AlMn1Mg1, AlMg3, G-AlMg3 Iso. n: 5005, 3103, 5005A, 5505, 5049, 5754, 5110, 3005, 3004 … 3.0515 …

… deposits are air-hardenable that can normally be heat-treated after welding. … Ferritic 13 % Chrome steel, 1.4000, 1.4001, 1.4002, 1.4003, …

… Solid drawn ,corrosion-resistant, chromium-nickel wire for welding heat-resistant austenitic steels of the 25% Cr, 20% Ni types. … relatively severe thermic shock, and is superior to type 309 L. … ISO 15608: 8.1  Austenitic ≤ 19 % Cr , TÜV 1000: Gr. 21-30,  Type: 25% …

… FL 838 is an agglomerated flux for SAW welding stainless steels and Nickel based alloys: AISI 308L, 347, 316L, …

… above 815 °C (1500°F) up to 1149 °C (2100°F), especially when welding on base metals of nickel-iron-chromium alloys. … Inconel alloys …

… treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, G-AlSi11 G-AlSi12 (Cu), G-AlSi7Mg, G-AlSi6Cu4 , …

… Heavy parts and thicker plates should be preheated (150°C), prior to welding. At the same time, it keeps the benefits of being relatively …