… Mo content, with low carbon content (less than 0.05%), to be used for welding creep resistant steels. … For 2.5%Cr-1%Mo-alloyed, …

… present in alloy C22; it is therefore considered suitable for welding this group of alloys. Alloy 59 consumables also provide strong, …

… Heavy parts and thicker plates should be preheated (150°C), prior to welding. At the same time, it keeps the benefits of being relatively …

… is good machinable. Very good weld deposit appearance and outstanding welding properties on both AC and DC+. Preheating is not required. …

… at sub zero temperatures down to - 60 °C (-80°C). Excellent welding properties. Therefore, suitable for the economic processing of … content HD< 3 ml/100g even after long storage. … Reh ≤ 500 MPa, ISO 15608: 1.3, 2.1, 2.3 S355JR, S355J0, S355J2, S450J0, S355N-S460N, …

… Extreme easy to weld with excellent welding properties. High world wide excepted quality with controlled … ppm) for temper embrittlement resistant applications. … Typ 1Cr0,5Mo, ISO 15608: ~5,1 1.7335, 1.7262, 1.7728, 1.7218, …

… FL 838 is an agglomerated flux for SAW welding stainless steels and Nickel based alloys: AISI 308L, 347, 316L, …

… Special alloy for welding aluminium-magnesium basis alloys with maximum 5% Mg. Zirconium …

… strength alloy with very good mechanical properties and perfect welding characteristics. High impact strength at very low temperatures … of the weld deposit. Weldable with Co2 and Mix gas. … Reh ≤ 960 MPa ISO 15608: ~3.1, 3.2 (Reh > 690 MPa) 1.8796, 1. 8925, 1.8940, 1.8983, …

… for steel types up to 550 MPa yield strength, excellent welding properties and extreme low hydrogen content below HD 3 ml/100gr … heat treatments as applied in Riser applications. … Reh ≤ 550 MPa, ISo 15608: 1.3, 2.1, ~3.1 S460N, S460M, S460NL, S460ML, S460Q-S555Q, …