1. … water, liquid acids, flue gas, corrosive gas.Low friction properties (metal to metal wear) … Copper aluminum metal spray wire for sea water resistant coatings, bearings, treads …
  2. … Seamless metal cored wire with remarkable stable arc and no spatters. Excellent … production process the hydrogen content is below 3ml/100gr weld metal even after long storage. … Reh ≤ 460 MPa (67 ksi) ISO 15608: 1.2, …
  3. … with high hardness and excellent wear properties especially to face metal to metal wear problems . Fused flux CEWELD® FL 880 or agglomerated flux …
  4. … Seamless metal cored wire with remarkable stable arc and no spatters. Excellent … production process the hydrogen content is below 3ml/100gr weld metal even after long storage in unconditioned condition. … Reh ≤ 550 …
  5. … very stable, spatter free arcs. This wire deposits low carbon weld metal of about 23%Cr-13%Ni-2.3%Mo. Cladding on low alloyed steels,the weld metal already achieves approximately the composition of ASTM 316 in the …
  6. … Outstanding alloy against high impact combined with abrasion including metal into metal friction. The weld deposit of CEWELD E Dur 60 Kb is one of the …
  7. … high basic flux cored wire that offers a absolute crack resistant weld metal conditioned by the high-basic slag. Therefore, suitable for the … with low spatter loss. Stable mechanical properties of the weld metal also at high heat input up to E<18 kJ/cm. Low hydrogen content …
  8. … °C and the deposition rate is 20-30% higher than with comparable tube metal. It is easy to use and inexperienced welders will have no … matters. Use a larger tip than is generally recommended for same diameter mild steel. Use slight excess acetylene feather. The deposit is …
  9. … Remarkable crack resistant weld metal in combination with very low (<3ml/100gr) hydrogen content. … wetting properties compare to solid wires that results in a bigger parameter range and improved duty cycle for the welder. … Reh < 690 MPa Iso …
  10. … Fully austenitic weld metal with high resistance against stress corrosion cracking and … Ni, Mo and Cu. Sufficient resistance against oxidizing acids. The weld metal is corrosion resistant in sea water. CEWELD® SA Alloy 825 is best …