1. … of SP 1.4370 exhibit low shrink and are recommend for internal diameters, particularly where thick coatings are needed. Using the … than SP 1.4316 coatings, but not as thick as SP 420-B coatings. … Metals spray wire with good corrosion resistance and low shrink factor, recommended for inside diameters. … 1.4370 … SP 1.4370 … 14919: 5.12 …
  2. … carbides. The choice for the buffer layer is depending on the base metal and not always necessary.  … HRc 54-59, hardfacing alloy for …
  3. … Carbide deposits. The deposit gives a extreme high hardness, all spray metal requires no buffer layer except on materials considered …
  4. … CEWELD® OA MnCr is recommended in case of old layers or critical base metals. Weldable with M21 or without shielding gas. … 58-66 HRc …
  5. … better wetting properties compared to solid wires.Excellent weld metal quality and X-ray soundness and excellent slag removal.Excellent …
  6. … stainless steel that is heat-treatable. It has a nominal weld metal composition of 12% Chromium. These weld deposits are air …
  7. … suited to use as first layer in case off multi-layer welding. The weld metal will show no undercut !Preheating is normally done to slow down …
  8. … cracking due to the high Mo content. During build-up welding, the weld metal already achieves approximately the composition of ASTM 316 in the …
  9. … Absolutely crack resistant weld metal conditioned by the high-basic slag in combination with very low …
  10. … and weldability, better wetting compared to solid wires.Excellent weld metal quality and X-ray soundness and excellent slag removal.Developped …