… down hand welding. Excellent against pitting and stress corrosion. The PRE typical value of 36.1 stimulates outstanding impact properties at …

… appearance and outstanding welding properties on both AC and DC+. Preheating is not required. … Slag crushers, Sugar cane knives, …

… between 1024°C (1875°F) and 1052°C (1925°F) for one hour, followed by precipitation hardening between 623°C (1135°F) … Suitable for precipitation hardening stainless steel used for welding materials of …

… resistance and good resistance to carburization and oxidation. No preheating or post heat treatment is necessary. Pay attention to low …

… content (≈2 ml/100gr) even after many years of storage. Due to less preheating required huge savings can be made and these type of wires …

… cleaned prior to welding. Heavy parts and thicker plates should be preheated (150°C), prior to welding The alloy shows good …

… for welding grey, malleable, nodular and phosphorus cast iron. Preheat is not necessary. Heat input is low which favors limited heat …

… AC and DC+ with a recovery of 200% for excellent deposit performance. (Preheating is not required)Equivalent in FCAW: OA 59, OA 60 Mo, OA 61, …

… 10 KJ/cm. Cooling time (T8/5) must be adjusted by travel speed and preheat temperature. … S890 TM-pipe steels to StE 890 to S890QL1, A …

… alloys and covers a weight range of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium alloys: AlMg3, AlMg4, …