1. … such as seawater or other chemical attack when accompanied by erosion. Welding instructions: CuMnAlNi is only Weldable on DC + and has an easy removable slag. Use the normal standard welding techniques. … Joining brass, Bronze, and steel, Ship …
  2. … FL 880 is a fused flux for SAW welding stainless steels and Nickel based alloys. Basicity: about 1,3 (according to Boniszewski) Current: DC or AC, in single or multi-wires Grain size: 1-16 … FL 880 can be used for a weight range of … to stainless steel, creep resistant steels, stainless and nickel based wires ranging from : AISI 410, 410 NiMo, 308L, 316L, 347, 309L, 309LNb, …
  3. … deposition rates and improved wetting properties compared to solid wires with comparable analysis. Attractive bead appearance without slag … of Vanadium and Niobium. Best to be used with FL 915 or FL 8111 welding flux. … 1.4317, 1.4313, 1.4407, 1.4414,    GX4CrNi13-4, …
  4. … 690 MPa and low temperature fine grained structural steels. Excellent welding properties in short and spray arc. High deposition rate and no … very low spatter loss. Excellent wetting properties compare to solid wires that results in a bigger parameter range and improved duty cycle …
  5. … grained structural steels up to 460 MPa yield strength. Excellent welding properties in combination with FL 155 high basic flux even in narrow gabs. Excellent wetting properties compare to solid wires that results in a bigger parameter range and improved deposition …
  6. … FL CS155 is a fused flux for SAW welding un and low alloyed carbon steels. Basicity: about 1,05 (according to Boniszewski) Current: DC or AC, in single or multi-wires Grain size: 1-16 … Unalloyed steels: St 33 – St 52, Ship …
  7. … deposition rates and improved wetting properties compared to solid wires with comparable analysis. Best to be used with CEWELD® FL 915 or CEWELD® FL 8111 welding flux.The deposit is resistant to seawater, thin acids and scale …
  8. … Extreme easy to weld with excellent welding properties suitable for welding galvanized plates or weld deposits that have to be galvanized …
  9. … Flux cored wire with slag support for high productivity welding especialy for root welding. The slag is self detaching and offers a unique protection …
  10. … High   strength   Manganese-Molybdenum-  alloyed filler metal for flame welding with extreme good flowing properties without spatters during welding. Excelent mechanical strenght due to the addition of …