… 71 T8 is able to Weld out of position at extreme currents and offers a Low hydrogen weld deposit. Excellent slag removal and protective gas is not required. High impact strength at low temperatures combined with excellent mechanical properties within a wide range of heat inputs. Usable under AWS D1.8 for use on Demand Critical welds. … Rebuilding and …

… with the exception of the reduced carbon content. This results in lower hardness and strength values, which reduces the tendency to … alloy is also used in the chemical and petrochemical industry. The low proportion of accompanying elements (Sn, As, Sb, P) in the wire … insensitivity to temper embrittlement. … For similar 1.25%Cr-0.5%Mo-alloyed, heat-resistant, ferritic steels. 1.7335, 1.7242, 1.7337, …

… 71 T8 is able to Weld out of position at extreme currents and offers a Low hydrogen weld deposit. Excellent slag removal and protective gas is not required. High impact strength at low temperatures combined with excellent mechanical properties within a wide range of heat inputs.Usable under AWS D1.8 for use on Demand Critical welds. … Rebuilding and …

… “FeNi” types because of improvements, such as: weldable with very low current, non overheating coating and a powerful arc at very low amps. The deposit is free from porosity even on old and or otherwise diluted base material. Preheating is normally done to slow down the cooling speed, in case you can not control the cooling …

… Mn, Ni, Cr and Mo alloyed basic electrode for welding low alloyed steels with tensile strength > 620 MPa. Crack resistant and well suited for low-temperatures, ductility down to -50°C. Preheating, interpass …

… “FeNi” types because of improvements, such as: weldable with very low current, non conductive coating and a powerful arc at very low amps. Preheating is normally done to slow down the cooling speed, in case you can not control the cooling …

… Mn, Ni, Cr and Mo alloyed basic electrode for welding low alloyed steels with yield strength > 690 MPa. Crack resistant and well suited for low-temperatures, ductility down to -60°C. Preheating, interpass …

… “FeNi” types because of improvements, such as: weldable with very low current, copper coated core wire and a powerful arc at very low amps. Preheating is normally done to slow down the cooling speed, in case you can not control the cooling …

… all-position welding with higher currents. Applicable down to -40°C. Low spatter loss and remarkably easy slag removal. Due to the seamless … storage and processing time, < 4 ml/100 g is guaranteed according to AWS. EN -ISO 17632-A: T 50 4 Mn1Ni P M21 1 H5 ( for > 1,5 kJ/mm ) EN -ISO 18276-A: T 55 4 Mn1Ni P M21 1 H5 ( for < 1,5 kJ/mm ) ASME -AWS A 5.36: E81T1-M21A4-Ni1-H4 ( for > 1,5 kJ/mm ) ASME -AWS A 5.36: …

… Excellent welding properties with easily controllable flow permits spatter free welding with very low current. Due to the very low heat input and unique composition of Ni the transition zone will …