… In this  Situation Ceweld SP NiAl is recommended. Suited for wear parts subject to extreme heavy abrasion …

… In this  Situation Ceweld SP NiAl is recommended. Suited for wear parts subject to extreme heavy abrasion …

… welding speed with corresponding flux.  Suitable fluxes are depending on the weld metal requirements, in most cases CEWELD® FL 155 …

… Certilas steht Ihnen Tag und Nacht zur Verfügung. Wir verwenden hochentwickelte Computersysteme, die es uns ermöglichen, Ihre …

… metal is machinable only by grinding. Stringer bead technique is recommended. The hard surfacing contains check cracks, but this does not …

… maximum 5% Mg. Zirconium added as grain refiner to improve both the bending and corrosion resistance. … Aluminium alloys: AlMg4,5Mn, …

… Ti can be used for a working temperature of up to 450ºC. The recommended preheat temperature is 200ºC - 300°C unless the base material …

… (internal shielding gas). As they produce a slag, they are not recommended for multi-pass welding. … ISO 15608: 8.1 / TüV Groupe 29 (+22+21) …

… The alloy has a low carbon content which makes it particularly recommended when there is a risk of intergranular corrosion. The higher …

… in the first layer. A buffer layer with OA 4370 or OA MnCr is recommended in case of sensible basematerial or old Hardface-layers. … 59-62 …