… Dur R (Ni) is an extruded oxy-acetylene rod, a newly designed hard-surfacing product consisting of spherical cast tungsten carbide and a … and worn parts can be rebuild without removing the old material. The surface should be free from fats, oil, rust and other foreign matters. …

… up to 550°C. Typical applications are in power plant construction, pressure pipe, turbine and boiler construction. The alloy is also used … low proportion of accompanying elements (Sn, As, Sb, P) in the wire ensures a low Bruscato factor (X < 10 ppm) and therefore insensitivity to …

… spraying. It is self bonding to most materials and requires minimal surface preparation. Bond strengths in excess of 9000 psi can be achieved on grit blasted surfaces. SP 80/20 NiAl exhibits good resistance to high temperature …

… blankets the solidified weld during subsequent passes until the root surface temperature stays below 600 degrees F. Backup shielding also should be used on the back surface of sheet or plate less than 1/4 in. thick to prevent oxidation. …

… a medium hardness and is resistant against metal-metal wear and high surface pressure.  … 1.4317, 1.4313, 1.4407, 1.4414,    GX4CrNi13-4, X3CrNiMo13-4, …

… up to 550°C. Typical applications are in power plant construction, pressure pipe, turbine and boiler construction. The alloy is also used … low proportion of accompanying elements (Sn, As, Sb, P) in the wire ensures a low Bruscato factor (X < 10 ppm) and therefore insensitivity to …

… as the Arc Spray process. The wire has a high polished and clean surface to assure the best feeding and thermal spray properties. Sprayed layers of … working temperature: approximately 850 °C … Shafts, Clutches, Gliding surfaces, Valves, Bond coatings etc. … SP 95/5 (NiAl) … 14919: 6.5 …

… CEWELD® E 6013 T is a thick coated electrode for joining and surfacing steel structures of all kinds in mechanical engineering, body … no spatter losses. Very easy slag removal. Smooth, finely rippled seam surface and low fume. … Rp< 420 MPa (60ksi) ISO 15608: 1.1,1.2, (1.3) …

… is believed to be the result of Ni++ and Mo++ ions that alter the surface electrochemistry of the material in the crevice or under a surface deposit. Grade 12 has better elevated temperature properties than Grade 2 or 3 and is sometimes specified for pressure vessels or piping for its superior strength alone. … Titanium …

… AquaForce, the #1 underwater welding electrode …