1. … This pure aluminum filler metal offers excellent weldability when properly cleaned prior to welding. Heavy parts and thicker plates should be preheated (150°C), prior to welding  … Cast aluminium special repairs, …
  2. … High pressure resistance and high wear resistance. The alloy is characterized by very low thermal electromotive force (emf) compared to …
  3. … CEWELD ® AA FeNi have a very good welding and wetting characteristics … for welding grey, malleable, nodular and phosphorus cast iron. Preheat is not necessary. Heat input is low which favors limited heat … EN-GJS-400-15, EN-GJS-400-18, EN-GJS-450-10, EN-GJS-500-7, EN-GJS-600-3, EN-GJS-700-2. GGG40, GGG45, GGG50, GGG60; GGG70, GGG80 … AA FeNi …
  4. … The weld puddle is amazingly fast freezing and therefore especially preferred in vertical down position with high speed and deep … achieved on old and dirty or otherwise diluted plates. … Rp< 420 MPa (60ksi) ISO 15608: 1.1,1.2, (1.3) S235JR-S355JR, S235JO-S355JO, …
  5. … Very good abrasion resistance in combination with impact even at higher temperatures up to 550ºC. To much layers should be avoided, preheat is necessary to avoid cracking. A buffer layer with OA 4370 or …
  6. … This alloy offers excellent weldability when properly cleaned prior to welding. Heavy parts and thicker plates should be preheated (150°C), prior to welding The alloy shows good … 3.3315, 3.3535, 3.3206, 3.3541, EN AW 5005A, EN AW 5754, EN AW 6060, EN AC 51100, EN AW 5454, EN AW 5251,   … AlMg 3 … A 5.10: ER5754 …
  7. … 4130 offers extreme high strength with excellent ductility and good weldabillity. Preheat and interpass temperature > 200°C …  1.7218, 1.7225 25 CD4, 13 …
  8. … Excellent welding properties with easily controllable flow permits … in case off multi-layer welding. The weld metal will show no undercut !Preheating is normally done to slow down the cooling speed, in case you … EN-GJS-400-15, EN-GJS-400-18, EN-GJS-450-10, EN-GJS-500-7, EN-GJS-600-3, EN-GJS-700-2                                       G GG-40, G …
  9. … Due to the high resistance to cracking and toughness, all weld metal requires no buffer layer. Suited for wear parts subject to heavy pressure, impact and shock. The interpass temperature should be maximum …
  10. … The basic offshore electrode according to the latest offshore requirements for sub zero temperatures down to -60°C. CTOD tested and suitable up to steel types with 460 MPa yield strength (such as S460), approved according to grade 5Y46 …