… Stainless deposit with low carbon content. Low heat input is recommended to avoid pronounced grain coarsening. Absence of stabilization …

… to avoid cracking. A buffer layer with OA 4370 or OA MnCr is recommended in case of sensible basematerial or old layers. Weldable without …

… Recommended for operating temperatures up to 1050°C in carburized …

… or chipping of. In case of sensitive base material preheating is recommended at 300 - 400 °C. Old Hardfacing layers should be removed, clean …

… resistance against organic and non-oxidizing acids and are recommend for internal and external diameters. Using the combustion wire …

… long term creep properties. These consumables are specifically intended for high integrity structural service at elevated temperature so …

… thanks to the Titanium carbides. The choice for the buffer layer is depending on the base metal and not always necessary.  … HRc 54-59, …

… resistance against organic and non-oxidizing liquids and are recommend for internal and external diameters. Using the combustion wire …

… weld cracking and produces bright, almost smut-free welds. Not recommended for anodizing. Non-heat treatable. Thicker sections should be …

… This results in lower hardness and strength values, which reduces the tendency to crack, especially if the weld seams are not …