… CEWELD® AlSi12 Tig was originally developed as a brazing alloy to take … point and narrow freezing range. In addition, it has a higher silicon content than AlSi5, which provides increased fluidity and reduced … elevated temperatures. Non-heat treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, G-AlSi11 G-AlSi12 …

… Megafil wires are seamless and therfore they offer a lower hyrogen content (≈2 ml/100gr) even after many years of storage. Due to less preheating required huge savings can be made and these type of wires offer better feeding properrties …

… Atteindre une limite d'élasticité de 890 N/mm2 est déjà extrêmement difficile et les restrictions T-8/5 sont presque impossibles à respecter dans la pratique. Habituellement, des … et la plupart du temps, la conception est sous-adaptée. Ceweld AA M960 a été développé pour atteindre une limite d'élasticité d'au moins …

… CEWELD E NiFe 60/40 K has a few benefits compare to other “FeNi” types … current, copper coated core wire and a powerful arc at very low amps. Preheating is normally done to slow down the cooling speed, in case you … EN-GJS-400-15, EN-GJS-400-18, EN-GJS-450-10, EN-GJS-500-7, EN-GJS-600-3, EN-GJS-700-2. GGG40, GGG45, GGG50, GGG60; GGG70, GGG80 … E NiFe …

… CEWELD® E DUR 350 Kb is a Hardfacing electrode against high impact combined with abrasion. This alloy … appearance and outstanding welding properties on both AC and DC+. Preheating is not required. Outstanding slag release. … Rebuilding worn …

… Alloy 740H Tig is a nickel-base, precipitation hardenable superalloy that offers a unique combination of high strength and creep resistance at elevated …

… Excellent weldabillity and good mechanical strength combined with good … alloys and covers a weight range of alloys. Thicker sections should be preheated (150°C) prior to welding. Qualified by Lloyds for manual and … 3.3211, 3.4335, EN AW 5086, EN AW 5083, EN AW 5019, EN AW 5019, EN AW 6060, EN AW 6005A, EN AW 6082, EN AW 6061, EN AW 7020, EN AC 51300, EN …

… NiCrMo 686 (UNS N06686/W.Nr. 2.4606) is a single-phase, austenitic … to enhance properties. Low carbon (C) helps minimize grain boundary precipitation to maintain corrosion-resistance in the heat-affected … and super-austenitic stainless steels, nickel alloys such as UNS N06059 and N06022, INCONEL alloy C-276, and INCONEL alloys 622, C22, 625, …

… Excellent weldabillity and good mechanical strength combined with good … alloys and covers a weight range of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium alloys: AlMg3, AlMg4, … 3.3545, 3.3206, 3.3210, 3.2315, 3.3211, 3.4335, EN AW 5086, EN AW 6060, EN AW 6005A, EN AW , EN AW 6061, EN AW 7020,EN AW 7021 EN AC …

… He is a copper coated, Ni-alloyed (2,4% Ni), solid wire for low temperature … of 470 Mpa. The wire provides excelent impact thoughness down to -60°C. … For cryogenic construction steels and Ni bearing low temperature steels. 11MnNi5-3, 13MnNi6-3, 15NiMn6, S275NL-S460NL, S275ML-S460ML, P275NL2-P460NL2, P355ML2-P460ML2 ASTM: A203 grade …