… Recommended for operating temperatures up to 1150° C in carburized …

… carbide tip tools, hardening is possible. The maximum hardness is dependent on the base metal and is usualy already achieved in the first …

… maximum 5% Mg. Zirconium added as grain refiner to improve both the bending and corrosion resistance. … Aluminium alloys: AlMg4,5Mn, …

… The temperature limits for use under intermittent oxidation depend on cycle frequency. In no case shall a temperature of 1000°C be …

… coatings on steel substrates. Furthermore, the aluminum coating tends to form an oxide film that protects it from further attack. … … on components such as conductive areas on insulators, capacitor end caps and varistors. Cathodic corrosion protection on steel, …

… be deposited. A Buffer layer with OA 4370, OA MnCr or ER 100 is recommended.  … 67-69 HRc hardfacing alloy, for fire gratings, sintering …

… not be deposited. A Buffer layer with OA 4370 or OA MnCr is recommended in case of old layers or critical base metals.. Equivalent in …

… layer. A buffer layer with CEWELD® OA 4370 or CEWELD® OA MnCr is recommended in case of sensible basematerial or old hardface-layers. Weldable …

… or chipping of. In case of sensitive base material preheating is recommended at 300-400°C. Old Hardfacing layers should be removed, clean or …

… carbide tip tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved already in the first layer.  … …