1. … devices for calibration of inverter machines. ♦ Turntable, 1200 mm diameter with 5000 kg load capacity. ♦ Pendulum device for swinging …
  2. … Coatings of SP 1.4370 exhibit low shrink and are recommend for internal diameters, particularly where thick coatings are needed. Using the … corrosion resistance and low shrink factor, recommended for inside diameters. … SP 1.4370 … 14919: 5.12 …
  3. … and non-oxidizing acids and are recommend for internal and external diameters. Using the combustion wire spray process, CEWELD® SP 316LSi …
  4. … and non-oxidizing liquids and are recommend for internal and external diameters. Using the combustion wire spray process, CEWELD® SP 1.4302 …
  5. … Tungsten based hardfacing alloy containing 52-58% (depending on wire diameter) tungsten carbides. OA WC2-Fe  has good welding …
  6. … and non-oxidizing acids and are recommend for internal and external diameters. Using the combustion wire spray process, CEWELD® SP …
  7. … to the risk of grain growth in the melted zone, welding wire with a diameter larger then 1,2 mm is to be avoided … 1.4000, 1.4002, 1.4016, …
  8. … Alloy 450 to Nickel 200 and or other Copper -Nickel alloys. Small diameters can be used in all positions. … (Monel 67): Wrought and Cast …
  9. … matters. Use a larger tip than is generally recommended for same diameter mild steel. Use slight excess acetylene feather. The deposit …
  10. … industries. Usable for butt and fillet welds in all positions for diameters 2.4 and 3.2mm. Diameters < 4.0mm excellent in down position. … Joining Duplex, …