CEWELD Alloy B3

<

PRODUCT SPECIFICATIONS
PACKAGING

Type

Nickel based wire or rod for welding Hastelloy B2 and B3

classification

AWS

A 5.14: ERNiMo-10

W.Nr.

2.4600

Applications

Plants for the production and processing of
hydrochloric, sulfuric, acetic and phosphoric acids.
Plants for ethylbenzene production.
Pressure vessels for chloroprene production.
Plants for the production of phenol from isopropyl benzene.
Pyrolysis plants for the production of acetic anhydride

Type

Nickel based wire or rod for welding Hastelloy B2 and B3

Applications

Plants for the production and processing of
hydrochloric, sulfuric, acetic and phosphoric acids.
Plants for ethylbenzene production.
Pressure vessels for chloroprene production.
Plants for the production of phenol from isopropyl benzene.
Pyrolysis plants for the production of acetic anhydride

Properties

CEWELD® Alloy B3 is a nickel-base alloy with excellent resistance tot hydrochlorid acid at all concentrations and tempertures. It also withstands hydrogen chloride, sulfuric, acetic, hydrofluoric nd phosphoric acids. The alloy has improved thermal stability, fabricability and stress corrosion cracking resistance.

Classification

AWS

A 5.14: ERNiMo-10

F-nr

43

FM

6

W.Nr.

2.4600

Suitable for

Hastelloy B2, Hastelloy B3, dissimilar welding Hastelloy to nickel- of iron-based corrosion alloys, for weld overlay cladding

Welding positions

Redrying

Not required

Gas acc. EN ISO 14175

I1

Analysis

C	Si	Mn	Cr	Ni	Mo	Nb	Ti	V	Fe	W	Co	Cu	Al	P	S	Nb+Ta
0.01	0.08	2	2	68	28		0.1	0.1	2	2	2

Mechanical Properties

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Impact Energy (J) ISO-V	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	RT	Hardness
As Welded	544	824	45	195	HRc

product sheet

declaration of performance

declaration of conformity

Ask quotation

MSDS

Alloy B3 Hasteloy Mig welding wire

Alloy B3 Hasteloy Mig welding wire

Packing info

Alloy B3 0,9mm
Packaging	KG/unit	EanCode
BS-300	13,6	8720663419873

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.