CEWELD 320 Tig

<

PRODUCT SPECIFICATIONS
PACKAGING

Type

Solid stainless steel rods for high corrosive environments

classification

AWS

A 5.9: ER320

EN ISO

14343-B: W 320

Applications

CEWELD® 320 Tig is used in a variety of industries, including chemical processing, petrochemical and refining, marine, pharmaceutical and food processing. End use applications include storage tanks, mixing tanks, agitators, pump and valve parts, food processing equipment, fasteners and fittings

Type

Solid stainless steel rods for high corrosive environments

Applications

CEWELD® 320 Tig is used in a variety of industries, including chemical processing, petrochemical and refining, marine, pharmaceutical and food processing. End use applications include storage tanks, mixing tanks, agitators, pump and valve parts, food processing equipment, fasteners and fittings

Properties

CEWELD® 320 Tig was designed specifically to withstand sulfuric acid. Its nickel, chromium, molybdenum and copper levels all provide excellent general corrosion resistance. Restricted carbon plus columbium stabilization permits welded fabrications to be used in corrosive environments, normally without post-weld heat treatment. At 33% nickel, CEWELD® 320 Tig has practical immunity to chloride stress corrosion cracking. This alloy is often chosen to solve SCC problems, which may occur with 316L stainless

Classification

AWS

A 5.9: ER320

EN ISO

14343-B: W 320

F-nr

6

FM

5

Suitable for

Alloy 20, Carpenter 20, 320

Approvals

CE

Welding positions

Redrying

Not required

Gas acc. EN ISO 14175

I1

Analysis

C	Si	Mn	P	S	Cr	Ni	Mo	Nb	N	W	Cu
0.014	0.5	1.6	0.007	0.007	20	34	2.5	0.25			3.5

Mechanical Properties

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded	400	590	35	HRc

product sheet

declaration of performance

declaration of conformity

Ask quotation

MSDS

320 Tig

320 Tig

Packing info

320 Tig 2,4 x 1000mm
Packaging	KG/unit	EanCode
Tube	5	8720682050187

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.