308L Tig

Category 
GMAW-GTAW Solid wires
type 
Stainless steel Tig filler metal for welding CrNi 18/10 types.
applications 
Boilers, agriculture, liquid storage tanks, food machinery, furniture.
Properties 

CEWELD 308L has good general corrosion resistance. The alloy has a low carbon content, making it particularly recommended where there is a risk of intergranular corrosion.

classification
AWS 
A 5.9: ER 308L
F-No. 6
EN ISO 
14343-A: W 19 9 L
FM5
DIN: W.Nr. 
1.4316
Suitable for 
W.Nr:   
. 		 1.4306, 1.4301, 1.4541, 1.4550, 1.4311, 1.4546, 1.4312, 1.4300, 1.4312, 1.4371, 1.4541, 1.4543, 1.4550, 1.4452
DIN
.		 X2CrNi 19 11 (TP), X4CrNi 18 10 (TP), X6CrNiTi 18 10 (TP), X6CrNiNb 18 10 (TP), X2CrNiN 18 10 (TP), X5CrNiNb 18 10, G-X10CrNi 18 8 (TP),
AISI
.		 202, 302, 304L, 304, 305, 321, 347, 304 LN
ASTM A320 Grade B8C/D, 302

 

approvals 
CE approved
welding positions: 
weld metal weight %

C

Mn

Si

Cr

Ni

Mo

P

S

<0.03

1.0-2.5

0.3-0.65

19.5-22.0

9.0-11.0

<0.75

<0.03

<0.03
mechanical properties

Heat

RP0,2

Rm

A5

Impact Energy (J) ISO-V

Hardness

Treatment

(N/mm2)

(N/mm2)

(%)

20°C

-60°C

-196°C

HRc / HV

AW

480

630

37

170

150

75
AW: as welded
redrying temperature 
not required
welding parameters / packing

Welding Parameters

Packing

D (mm)

Current (A) DC-)

single

master

1.6 x 1000

50-80

5

25

2.0 x 1000

70-110

5

25

2.4 x 1000

110-180

5

25

3.2 x 1000

150-250

5

25
Gas acc. EN ISO 14175:
I1
pdf 
Ceweld 308 L TIG fiche produit
Save as PDFSave as PDF Declaration of conformity Decl. of performance

Disclaimer: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.