… range of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium alloys: AlMg3, AlMg4, AlMg5,AlMgSi0.5, AlMgSi1; …

… loss, without slag. Extremely crack resistant. Suitable for economic welding of CrMoV-steels up to 550 °C. Due to the seamless production …

… Solid drawn ,corrosion-resistant, chromium-nickel wire for welding heat-resistant austenitic steels of the 25% Cr, 20% Ni types. …

… present in alloy C22; it is therefore considered suitable for welding this group of alloys. Alloy 59 consumables also provide strong, …

… for surface protection with extreme hardness that can be applied by welding. It’s particularly useful for protecting surfaces against wear …

… wetting properties due to slag support especially in positional welding. Excellent weldabillity and suitable for use with ceramic …

… For welding heat-resistant austenitic steels of the 25% Cr, 20% Ni types. …

… Excellent welding properties with high buildup capacity and low dilution rate …

… Coppered solid wire for SAW welding in combination with our FL 180 flux … Unalloyed steels: St 33 – …

… production.  Thicker sections should be preheated (150°C) prior to welding. … Filler metal for welding Aluminium alloys with maximum 4% Nickel … Al 4Ni0,2Ti Tig …