- … and impact), extreme wear and temperature shocks. The alloy is only machinable by grinding. Best used on wear pads, rotary seal rings, pump …
- … composition of CEWELD E Ni(-) the transition zone will stay well machinable and is therefore well suited to use as first layer in case off …
- … The interpass temperature should be maximum 250ºC. The weld metal is machinable with carbide tip tools, hardening is possible. The maximum …
- … This Nickel weld deposit offers a easily machinable weld deposit with high ductility and no undercut. … Welding …
- … The interpass temperature should be maximum 250ºC. The weld metal is machinable by special carbide tools, hardening is possible. The maximum …
- … homogeneous particle distribution. The spray deposit is only machinable by grinding with diamond tools. … Cement industry, pumps, …
- … makes the alloy excellently suitable for metal to metal wear. Machinable by grinding. … Knives, cutter blades, agriculture, glas …
- … should be kept at 270ºC for the best results. The weld metal is only machinable by grinding. Due to the production method (seamless wire) this …
- … The interpass temperature should be maximum 250ºC. The weld metal is machinable by special carbide tools, hardening is possible. The maximum …
- … quality and X-ray soundness, stable arc at high currents and good machinable deposit. … 1.4710, 1.4745, 1.4712, 1.4762, 1.4713, 1.4773, …