1. … creep strength are kept above the minimum considered necessary to ensure satisfactory performance. In this case, weldments will be weakest …
  2. … Very good deoxidization and high hardness similar to cast bronzes. Surfacing and joining of Copper and CuSn-Alloys. Widely used and … Very good deoxidisation and high hardness similar to cast bronzes. Surfacing and joining of Copper and CuSn-alloys. Widely used and …
  3. … heat treatments. Approved by the notified body DNV in the class 4Y62 ensures save usage and the absence of Nickel fulfills the NACE requirements for sure gas. SAW: CEWELD S3 NiMo1 , a solid submerged arc wire with 0,95% …
  4. … 601, CEWELD® NiCro 601 is generally used as filler material. This ensures consistent properties and corrosion resistance in the weld zone, … and the type of corrosive environment when selecting materials to ensure optimal performance and longevity. … Properties of alloy 601? …
  5. … spraying. It is self bonding to most materials and requires minimal surface preparation. Bond strengths in excess of 9000 psi can be achieved on grit blasted surfaces. SP 80/20 NiAl exhibits good resistance to high temperature …
  6. … up to 550°C. Typical applications are in power plant construction, pressure pipe, turbine and boiler construction. The alloy is also used … low proportion of accompanying elements (Sn, As, Sb, P) in the wire ensures a low Bruscato factor (X < 10 ppm) and therefore insensitivity to …
  7. … blankets the solidified weld during subsequent passes until the root surface temperature stays below 600 degrees F. Backup shielding also should be used on the back surface of sheet or plate less than 1/4 in. thick to prevent oxidation. …
  8. … was first carried out by the firm Mammoet to bring the Russian submarine the Koersk to the surface. Welded bushings were slid over a long steel cable, which then …
  9. … as well as permanent stress by heat influence, metal wear and high surface pressure  … 1.4317, 1.4313, 1.4407, 1.4414,    GX4CrNi13-4, X3CrNiMo13-4, …
  10. … up to 550°C. Typical applications are in power plant construction, pressure pipe, turbine and boiler construction. The alloy is also used … low proportion of accompanying elements (Sn, As, Sb, P) in the wire ensures a low Bruscato factor (X < 10 ppm) and therefore insensitivity to …